- Versatile analog or pulse command interface
- Position/Speed/Torque modes
- Dual control modes for more complex machine control
- Standalone single-axis position control with position teaching capability
- Electronic gear following (4 selectable gear ratios)
- Jog and Homing functions
- Speed/Torque limit operation
- User-definable Acceleration/Deceleration with jerk limiting (s-curve)
- Built-in keypad/display for setup and diagnostics
- Motor settling time below 1 ms for fast machine cycle times
- Excellent low speed stability and performance: less than 0.5% error at 1 RPM
- 0msec acceleration time from running without load -/+ 3000 RPM
- Modbus Slave serial port (RS-485/RS- 422) for reading and writing parameters from Proficy Logic Developer
Product HighlightsThese versatile amplifiers support simple stand-alone positioning capability using up to 8 stored motion profiles or can be connected to any motion controller using an analog or pulse command interface. A built-in touchpad and display provides convenient access to configuration parameters and system information. The serial interface supports multi-drop system configurations and Modbus ASCII or RTU communication protocol that can be used to change the stored positions or system configuration allowing for greater application flexibility. The VersaMotion family of servo motors offers high servo performance in a compact package. The motors range from 100 W to 3 kW with continuous torque ratings from 0.3 Nm to 9.5 Nm. All motors have metric mounting configurations and include a shaft key and oil seal. VersaMotion motors have encoder feedback with a quadrature resolution of 10,000 counts per motor revolution. A 24 VDC holding brake option is available for vertical axes or applications that need to hold position during power loss. Motors are matched with the VersaMotion amplifiers of the same power rating. | |